597 Cylindrical FlatSample Cell
For Flat Disk Specimens, fitted with gas bubbler
Model 597 has been developed in order to be a widely versatile cell for testing of flat samples. The exposed area can be easily changed by substituting the covering mask, many standard masks are available but even more can be produced upon request. The cell is gastight, allowing to work in inert atmosphere. On the closing cap, four NS12 conical tapered joint housings are able to accomodate any AMEL’s electrode.
| 597/SH-2 | Sample mask, exposed area 2cm2 |
| 597/SH-3 | Sample mask, exposed area 3cm2 |
| 597/SH-4 | Sample mask, exposed area 4cm2 |
| 597/SH-5 | Sample mask, exposed area 5cm2 |
| 597/SH-20 | Sample mask, exposed area 20cm2 |
| 597/SHOR-2 | Sample sealing gasket, exposed area 2cm2 |
| 597/SHOR-3 | Sample sealing gasket, exposed area 3cm2 |
| 597/SHOR-4 | Sample sealing gasket, exposed area 4cm2 |
| 597/SHOR-5 | Sample sealing gasket, exposed area 5cm2 |
| 597/SHOR-20 | Sample sealing gasket, exposed area 20cm2 |
| 597/CH | Stainless steel complete support for Model 597 |
| 597/LU | Luggin capillary for Model 597 |
| 597/MB | Complete PMMA main body |
| 494/GB | Two way gas bubbler for Model 597 |
| 597/OR | Sealing gasket for PMMA main body |
| 494/MHS | Polypropilene NS12 cap for Model 597 |
| 591/BASE | Universal stand with Ø12 stainless steel pole |
| 591/COBO | Universal connection hub with Ø12mm junction |
| 203/LF | Magnetic stirrer |
