2700 Z-Pulse (EIS)
Is Z-Pulse a simple Frequency Response Analyzer for Electrochemical Impedance Spectroscopy?
The answer is no. During the development of this impedance spectroscopy unit, we merged the needs of EIS with the possibility of high speed pulse and waveform generation, opening new possibilities in electrochemistry.
Using any of AMEL’s potentiostats, both compact and tabletop models, the resulting system can be employed for any application, from battery characterization to film deposition in ultra-fast pulsed mode and impedance spectra in galvanostatic or poteniostatic modes.
ZPulse software, thanks to its intuitive and easy approach, is really user friendly, allowing for analysis up to 1MHz. 5MHz sampling frequency pushes time resolution down to few microseconds.
Sine | |
Frequency Range | 1μHz to 10MHz |
Amplitude | 20Vpp @1kHz |
Noise | ±0,1dB if < 100kHz ±0,15dB if < 5MHz ±0,3dB if ≤ 10MHz |
Square | |
Frequency Range | 1μHz to 10MHz |
Rise & fall time | 8ns |
Overshoot | < 1% |
Duty Cycle | 0,01% to 99,99% |
Asimmetry | < 0% of the period + 5ns @ 50% duty cycle |
Jitter (RMS) | < 50ps |
Triangle | |
Frequency Range | 1μHz to 10MHz |
Simmetry | 0% to 100% in 0,1% steps |
Pulse | |
Period | 100ns to 1000s |
Pulse Width | 15ns to 1000s |
Edge Time | 20ns to 1s |
Overshoot | < 1% |
Jitter (RMS) | < 50ps |
Arbitrary | |
Frequency Range | 1μHz to 10MHz |
Sampling Rate | 50MS/s |
DAC Resolution | 14bit |
Output Range | ±12V at frequency < 10MHz |
DC offset | ±12V at open circuit |
Resolution | 12 BIT |
Accuracy | 0,4% of range |
Power Supply, Connections and Dimensions | |
Computer Connection | Universal Serial Bus (USB) |
Voltage Mains | 12 to 24V DC, 1A max |
External Power | Model 2560 8-channel Power Supply Single Power Supply (provided if Model 2560 is not present) |
Dimensions (L x W x H) | 200 x 215 x 80mm |
Weight | 1,5kg |
Specifications are subject to change without previous notice
191/SUPS24 | Power supply for single unit 24V 1A |
191/BNCFRA | Set of 3 BNC cables for connection with potentiostats |
191/DUMMY | Dummy cell for Frequency Response Analyzer |