Hi-Power Potentiostat
General Features

Electrochemical laboratories have an increasing need for high currents instruments: batteries, fuel cells and other energy-related studies are on the leading edge of today’s research.

AMEL has 40-years of experience in high power potentiostats and has always offered state of the art instruments by strictly following the electronic field advances.

The Model 7060 is a powerful potentiostat available in two versions:

• ±30 V - ±12A or
• ±15V - ±25A

with all the features and advanced techniques available
at your fingertip.

Some parts of this new unit are specially addressed at energy-related studies in order to maximise the usable range of the instrument.

The unique characteristic of the 7060 to drive up to three slave units 7061 up to a huge 30 V 48 A deliverable power makes this potentiostat unsurpassed for power and flexibility.

The connection with our FRA model 7200 under the Zassist control software, opens, to the advanced research, a window on an unexplored world in high power EIS.

The presence of RS-232 and USB interfaces allow direct connection of the system to the computer; the Junior Assist and Battery Assist software will help you in programming experiments, testing sequences and long run cycling with plenty of flexibility on both driving waveforms and data acquisition.

Find today in the AMEL range the solution of tomorrow’s experiments!

7060 Master Unit - Technical Specifications

Polarisation capabilities
Voltage (compliance)	± 30 V or ± 15 V
Voltage (controlled range)	± 10 V
Current	± 10 A continuous (± 12 A peak) or ± 25 A
voltage resolution	400 uV
max current resolution	4 nA
accuracy	± (0.2% +0.1% F.S.) worst case
Reference electrodes
Input impedance	> 1 Tohm
Input capacitance	< 50 pF
Biasing current	< 50 pA @ 25 C°
Common mode rejection	> 50 dB full frequency response
Common mode voltage range	± 12 V
Input BNC	Outer contact grounded
Electrochemical tecniques
polarisation sweep	Ramp, staircase, triangle, square wave
real part managing	IR compensation
limits of IR compensation	0-400 % of the Rs
Frequency Response
Potentiostatic bandwidth (max)	20 KHz (-3dB) resistive load (1000 Ohm)
Galvanostatic bandwidth (max)	6 KHz (-3dB) resistive load (100 Ohm)
Meters and interfaces
Voltmeters & Ampere meters	± 25000 counts 20% overload allowed
Temperature meter	- 200 + 500 C° with PT1000 probes 0.1C° resolution 0.2C° accuracy
Sampling rate	100 readout / sec (included data transmission)
Digital interface	USB and RS 232 with full instrument control
Power supply and size
Voltage mains	115 / 230 V ranges (± 10%)
Power consumption	400 VA max
Size & weight	420 x 440 x 250 mm (L x W x H) Kg 25 (rackmount brackets excluded)

7061 Slave Unit - Technical Specifications

Polarisation capabilities
Voltage (compliance)	± 30 V or ± 15 V
Voltage (controlled range)	± 10 V
Current	± 10 A continuous (± 12 A peak) or + 25 A
Slave units connectable to 7060	Up to 3 for 30 V version 1 for 15 V version
Max system performance	30 V - 48 A or 15 V - 50 A